Download Now
ASRock EP2C602-4L/D16 ASpeed Graphics Driver

Thank you for purchasing ASRockRack EP2CL/D16 / EP2CL/ Graphics. Controller. ASPEED AST VRAM. DDR3 16MB. Output. Supports. Home > ASRock Rack Series > Server Motherboards. EP2CL/D16 GB; 4 PCIe x16, 1 PCIe x4, 1 PCI; ASPEED AST graphics, 1 VGA: D-. ASRock EP2CL/D16 Server Board (Socket , Intel C, DDR3,. . One last thing I wanted to discuss was the ASPEED AST graphics chip that is.


ASROCK EP2C602-4L/D16 ASPEED GRAPHICS DRIVER FOR WINDOWS 8

Type: Driver
Rating:
4.25
283 (4.25)
Downloads: 345
File Size: 7.37Mb
Supported systems: Windows 7/8/10, Windows XP 64-bit, Mac OS X 10.X
Price: Free* [*Free Registration Required]

Download Now
ASRock EP2C602-4L/D16 ASpeed Graphics Driver

Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components. When placing screws to secure the motherboard to the chassis, please do not over-tighten the screws!

Doing so may damage the motherboard. Do not force to insert the CPU into the socket if above situation is found.

Neptune: A Dual E Build - Build Logs - Level1Techs Forums

Otherwise, the CPU will be seriously damaged. Step 1. Open the socket: Step Disengage the left lever by pressing it down and sliding it out of the hook.

Disengage the right lever by pressing it down and sliding it out of the hook. Keep the right lever positioned at about 90 degrees in order to flip up the load plate.

DRIVER UPDATE: ASROCK EP2C602-4L/D16 ASPEED GRAPHICS

Step 2. Insert the Pin CPU: Hold the CPU by the edge with the triangle mark Pin 1 on your upper right corner.

ASROCK EP2C602-4L/D16 ASPEED GRAPHICS DRIVER FOR WINDOWS 10

Locate Pin1 and the two orientation key notches. Carefully place the CPU into the socket by using a purely vertical motion.

Verify that the CPU is within the socket and properly mated to the orient keys. Step 3. Close ASRock EP2C602-4L/D16 ASpeed Graphics socket: Flip the load plate onto the IHS, then the cover will automatically come off by itself. The cover must be placed if returning the motherboard for after service. Press down the right load lever, and secure it with the load plate tab under the retention tab.

Download ASPEED drivers

Press down ASRock EP2C602-4L/D16 ASpeed Graphics left load lever, and secure it with the load plate tab under the retention tab. Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat. Before you installed the heatsink, you need to spray thermal interface material between ASRock EP2C602-4L/D16 ASpeed Graphics CPU and the heatsink to improve heat dissipation. Ensure that the CPU and the heatsink are securely fastened and in good contact with each other.

For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for Pin CPU.

Apply thermal interface material onto center of IHS on ASRock EP2C602-4L/D16 ASpeed Graphics socket surface. Apply Thermal Interface Material Step 2. Place the heatsink onto the socket. Ensure fan cables are oriented on side closest to the CPU fan connector on the motherboard. Step 4.

Asrock Ep2C 4L D16 Owner S Manual

Use a screw driver to install the screws. Step 5. Connect fan header with the CPU fan connector on the motherboard.

Step 6. Secure excess cable with tie-wrap to ensure the cable does not interfere with fan operation or contact other components. Otherwise, it will operate at single channel mode. If you install only one memory module or two non identical memory modules, it is unable to activate Dual Channel Memory Technology. It is not recommended to install them on this motherboard. A single memory module should be installed ASRock EP2C602-4L/D16 ASpeed Graphics the blue socket.

Unlock a DIMM slot by pressing the retaining clips outward.

ASROCK EP2C602-4L/D16 ASPEED GRAPHICS DRIVERS WINDOWS

Top Interesting