Download Now
Silicon Image SiI3x12 SATARaid Driver

Silicon Image SiI SATA RAID Management Utility · Silicon Image Windows NT//XP/Server bit · Silicon Image SiI3x12 SATA RAID. ATI 43xx and Silicon Image SiI3x12 SATARaid Controller · ATI RS/ Southbridge Drivers (ECS Download) · Compaq Fast-Wide SCSI Controller. 5. Insert the driver diskette. Press S then press Enter. 6. Select Silicon Image SiI 3x12 SATARaid Controller for Windows XP/Server /Vista and press Enter.


Type: Driver
439 (3.92)
Downloads: 1013
File Size: 13.77Mb
Supported systems: Windows All
Price: Free* [*Free Registration Required]

Download Now
Silicon Image SiI3x12 SATARaid Driver

Follow the instructions in this section if you are performing a new installation of Windows NT 4. If installing Windowsyou must first edit the txtsetup. Si] section that reads: Power off the system.


Power up the system. From the menu presented next, select the controller installation process that corresponds to the version of Windows being installed and press 'Enter'.

Press 'Enter' again when prompted to continue on with text mode setup. Follow the setup instructions to select your choice for partition and file system. After setup examines your disks, it will copy files from the CD to the hard drive selected above and restart the system.


Last edited: Apr 6, Aug 20, Messages: Central Coast NSW. I have a A based PCI card and I had trouble once with freezing because of file corruption in the driver files. I downloaded the driver again and it then worked properly.

After I flashed recently to the latest 4. I had to reflash with 4.

  • User manual PNY P-DSA150-PCI-RF Network Card User Manual
  • The Mother Board
  • Quick Links

Wednesday, January 28, 1: I was having problems installing a couple of boxes from a different subnet, because they couldn't resolve the server name. I added the name and IP address of the server to the lmhosts file on the cd and that fixed the problem, until Windows tries to join up to the domain. During the installation, a message pops up that says the Domain controller couldn't be reached, and I tell it to continue and join later. Silicon Image SiI3x12 SATARaid

Well once Windows finishes installing, nothing happens, because the server still cannot be reached, so it just sits there. Justin Beckley.

Silicon Image SiI 3x12 SATALink Controller Driver Installation

R dans un message doc. I wanted a way to specify printers during the initial dialog and have them installed as part of the process.

I made some modifications to install. I keep a text file in "site" that contains a list of full unc paths to my various printers.

Silicon Image驱动,驱动下载网

During the initial dialog, this list is pulled up and the printer install choices are displayed as a multi-choice dialog. If any printers are selected, they are stuffed into a.

The vbs file contains Windows Script Host code that installs the printers. Changes made to Install.


The code is placed right after the section " NTP servers" Printers if -e "c: The printers must be setup on the print server such that they can be installed by just calling the full unc path to the printer from a command line or run dialog. Well, Silicon Image SiI3x12 SATARaid have never given much thought to that question, but I suppose my simple vbscript would not address that issue.

Top Interesting